Power Liftgate Module (PLGM)

B210E-BATTERY VOLTAGE HIGH

For a complete wiring diagram refer to the Wiring Information. Electrical Diagrams

- When Monitored:
At all times.

- Set Condition:
Anytime the Power Liftgate is activated and the module senses voltage input above 16.0 volts, this code will set.





1. CHECK ENGINE DTC's
1. With the scan tool, read ENGINE DTC's

Are there any ENGINE DTC's present?

No

- Go To 2.

Yes

- Diagnose and repair the DTC(s).

2. TEST FOR INTERMITTENT CONDITION
1. With the scan tool, record and erase DTC's
2. Start the engine and run for two minutes.
3. With the scan tool, read DTC's.

Does the scan tool display B210E-BATTERY VOLTAGE HIGH?

Yes

- Replace the Power Liftgate Module.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test.

No

- The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
- Perform BODY VERIFICATION TEST - VER 1. Body Verification Test.