Front Carpet

INSTALLATION





1. Place carpet inside vehicle through sliding door opening.
2. Roll carpet rearward toward rear door opening.
3. Install the third row seats Seat - Installation.
4. Install the rear carpet nuts attaching rear of carpet.
5. Install the quarter trim panel. Quarter Trim Panel - Installation.
6. Roll carpet forward under instrument panel.
7. Install push pin fasteners attaching carpet to floor in front seat area.
8. Install the lower B-pillar trim covers B-Pillar Trim Panel-Installation.
9. Install the sliding door sill plates. Scuff Plate - Installation.





10. Install the second row Stow N Go door assembly Load Floor - Installation.
11. Install the sill plates and front cowl panels. Scuff Plate - Installation and Cowl Trim Panel - Installation.





12. Install the winch plug (spare tire winch) (1).
13. Install the heel blocker (plastic block below accelerator pedal).
14. Install the floor console base tray and disconnect wire connector from the base tray Floor Console - Installation.
15. Install the instrument panel storage bin Instrument Panel Bin - Installation.
16. Install the front seats Seat - Installation.
17. Install the floor mats.