Wireless Ignition Node Receiver - Installation

INSTALLATION





1. Install wireless ignition node (WIN) (2) to instrument panel and install screws (1). Tighten screws to 2.5 Nm (22 in. lbs.).





2. Install electrical connector (2) to WIN (3).
3. Install coaxial electrical cable connector (1) to WIN (3).
4. Install instrument bezel.
5. Install knee blocker, Kneeblocker - Installation.
6. Connect negative battery cable, tighten nut to 5 Nm (45 in. lbs.).
7. Program the WIN, Programming and Relearning.