Remote Start Antenna - Removal

REMOVAL






WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

The remote start antenna is located at the front of the instrument panel on the driver's side.

1. Disconnect and isolate the battery negative cable.
2. Remove the instrument panel top cover. Instrument Panel Cover - Removal.
3. Remove the knee blocker. Kneeblocker - Removal.
4. Remove the instrument cluster Instrument Cluster - Removal.

NOTE: During removal of the remote start antenna note the routing location of the coaxial cable.

5. Remove the coaxial electrical cable connector (2) from the wireless ignition node (WIN) (1).
6. Remove the remote start antenna coaxial cable from mounting clips, if equipped.





7. Remove the screws (1) from remote start antenna module (2) and remove from instrument panel assembly.