B1BA5

B1BA5-AIRBAG SQUIB CONFIGURATION MISMATCH

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
With the ignition on.

- Set Condition:
If an Occupant Restraint Controller (ORC) configured for vehicles without side airbags is installed in a vehicle with side airbags.





1. VERIFY THAT DTC B1BA5-AIRBAG SQUIB CONFIGURATION MISMATCH IS ACTIVE

NOTE: Make sure the battery is fully charged.

1. Turn the ignition on.
2. With the scan tool, read ORC DTCs.

Does the scan tool display active B1BA5-AIRBAG SQUIB CONFIGURATION MISMATCH DTC?

Yes

- Go To 2

No

- Test complete, the condition or conditions that originally set this DTC are not present at this time.
- Perform the AIRBAG SYSTEM INTERMITTENT TEST. . Airbag System Intermittent Condition Test

2. CHECK FOR ACTIVE TIPM DTC
1. Verify that the vehicle is equipped with a Occupant Classification System (OCS).
2. With the scan tool, read the active TIPM DTCs.

Is active TIPM DTCs present?

Yes

- Diagnose and repair the active TIPM DTCs. Testing and Inspection.

No

- Go To 3

3. CHECK ORC PART NUMBER WITH SCAN TOOL
1. With the scan tool, select ECU View, select ORC, select ECU Details, and read the ORC part number.

Is the part number correct for the vehicle?

Yes

- Go To 4

No

- Replace the ORC.
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.

4. CHECK VIN WITH SCAN TOOL
1. With the scan tool, read the VIN.

Is the correct VIN displayed?

Yes

- Replace the ORC.
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.

No

- Replace or reprogram the Totally Integrated Power Module (TIPM).
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.