B222C

B222C-VEHICLE CONFIGURATION NOT PROGRAMMED

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously

- Set Condition:
The TIPM is not configured for the vehicle.





1. CHECK FOR ACTIVE DTC
1. Turn the ignition on.
2. With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Go To 2

No

- Test complete.

2. ACTIVE TIPM DTC
1. Cycle the ignition from off to run remaining in run.
2. With the scan tool, read DTCs.

Does the scan tool display this DTC as active?

Yes

- Go To 3

No

- Test complete.

3. VIN MISMATCH DTC PRESENT
1. Turn the ignition on.
2. With the scan tool, read DTCs.

Is DTC: B2206-CURRENT VIN MISSING / MISMATCH also active?

Yes

- Refer to repair procedure for DTC-B2206-CURRENT VIN MISSING / MISMATCH. B2206

No

- Replace the TIPM.
- Perform the BODY VERIFICATION TEST. Body Verification Test