B223D

B223D-OCCUPANT CLASSIFICATION MODULE DTC PRESENT

- When Monitored:
With the ignition on.

- Set Condition:
This DTC will set if the Occupant Classification Module (OCM) has an active DTC.





1. VERIFY ACTIVE ORC DTC
1. With the scan tool, read the ORC active DTCs.

Does the scan tool display active B223D-OCCUPANT CLASSIFICATION MODULE DTC PRESENT DTC?

Yes

- Go To 2

No

- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.

2. VERIFY ACTIVE OCM DTC
1. With the scan tool, read the OCM DTCs.

Are there any active DTC present?

Yes

- Testing and Inspection Perform the appropriate diagnostic procedure.

No

- WARNING: Turn the ignition off, disconnect the 12-volt battery and wait two minutes before proceeding. Failure to follow these instructions may result in possible serious or fatal injury.

- WARNING: If the Occupant Restraint Controller (ORC) is dropped at any time, it must be replaced. Failure to follow these instructions may result in possible serious or fatal injury.

- Replace the ORC.
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.