B2255

B2255-OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLE

- When Monitored:
With the ignition on. The Occupant Restraint Controller (ORC) on board diagnostics continuously performs internal circuit tests.

- Set Condition:
This DTC will set if the ORC Roll Over Feature has been disabled via the scan tool.

- NOTE: Whenever the ORC is removed for repairs the ORC Roll Over Feature can be disabled to prevent accidental deployment of the airbags.





OCCUPANT RESTRAINT CONTROLLER ROLL OVER FEATURE DISABLED
1. Turn the ignition on.
2. With the scan tool read the ORC Roll Over Feature status Enabled or Disabled.

Does the scan tool show Roll Over Feature Disabled?

Yes

- After repairs are complete use the scan tool to enable the Roll Over Feature.
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.

No

- Replace the ORC.
- Perform the AIRBAG SYSTEM VERIFICATION TEST. Airbag System Verification Test.