C1078

C1078-TIRE REVOLUTIONS RANGE PERFORMANCE

For a complete wiring diagram, refer to the Wiring Information.

- When Monitored:
Continuously.

- Set Condition:
A comparison between the tire circumference value contained in the EEPROM and the tire circumference value received on the CAN bus. Programmed value for the tire size is not within acceptable range.





INCORRECT VALUE PROGRAMMED INTO TIPM





1. Verify that the correct Tire/wheel information is programmed in the Totally Integrated Power Module (TIPM).

Is the correct value programmed in the TIPM according to the chart?

Yes

- Test complete.
- Perform the ABS VERIFICATION TEST. ABS Verification Test.

No

- Program the correct Tire/Wheel information in the TIPM.
- Perform the ABS VERIFICATION TEST ABS Verification Test.