Driver Door Module (DDM)

U0196-LOST COMMUNICATION WITH VEHICLE ENTERTAINMENT CONTROL MODULE





For a complete wiring diagram, refer to the Wiring Information..

- When Monitored:
Continuously, when the ignition is on.

The battery voltage is between 10 and 16 volts.

IOD fuse installed.

Front Control Module (FCM)is configured correctly.

- Set Condition:
Bus messages not received from the vehicle entertainment system (DVD player) for approximately two to five seconds.





VERIFY DTC IS ACTIVE

NOTE: Ensure the IOD fuse is installed and the battery is fully charged before proceeding.

1. Turn the ignition on.
2. With the scan tool, read active Door Module DTCs.

Is this DTC active?

Yes

- Perform the diagnostic procedure for this DTC.Testing and Inspection.

No

- Perform the Stored Lost Communication DTCs diagnostic test procedure. Stored Lost Communication DTCs.