Vehicle Theft Security Siren - Removal

REMOVAL





1. Disconnect and isolate the battery negative cable.
2. Locate the alarm siren module (4) on the engine compartment side of the front end module carrier (3), just below the inboard side of the right front combination lamp unit housing (2).
3. Disconnect the front end module wire harness connector (5) from the connector receptacle for the siren.
4. Remove the grille panel (1) from the front of the vehicle. Grille - Removal.
5. From the front of the vehicle, remove the screw that secures the siren to the carrier.
6. Remove the siren from the engine compartment side of the carrier.