Liftgate Glass - Removal

REMOVAL





1. Remove two bolts (2) from the lower trim panel (3).
2. Using a trim stick C-4755 or equivalent, release the fasteners at all of the locations around the trim panel (3).
3. Lift the trim panel (3) from the lift gate (1).





4. Disconnect the electrical connector (1 ) from the heated glass tab (3 ) on the lift gate glass (2).





5. Cut urethane bonding from around quarter glass (1) using a suitable sharp cold knife. A pneumatic cutting device can be used if available.
6. Remove glass from vehicle.