Windshield - Removal

REMOVAL





1. Remove inside rear view mirror (3) Interior Rearview Mirror - Removal.





2. Remove cowl grille (2) Cowl Panel Cover - Removal.





3. Remove the A-pillar weatherstrip retainer (1).





4. Remove the A-pillar trim panels (2) A-Pillar Trim Panel-Removal.





5. Remove the headliner (9) and from the inside of the vehicle, cut the upper urethane bonding from around windshield upper edge using a suitable sharp cold knife (C-4849). A pneumatic cutting device can be used but is not recommended Headliner - Removal.
6. From the outside of the vehicle, cut urethane bonding from the remaining sides of the windshield using a suitable sharp cold knife (C-4849). A pneumatic cutting device can be used but is not recommended.
7. Separate windshield from vehicle.