Camshaft Bearing

CAMSHAFT BEARING CAPS





NOTE: Position the left side camshaft so that the camshaft sprocket dowel is near the 1 o'clock position and the right side camshaft so that the camshaft sprocket dowel is near the 10 o'clock position. This will place the camshaft at the neutral position easing the installation of the camshaft bearing caps.

Install the camshaft bearing caps and hand tighten the retaining bolts.
Working in 1/2 turn increments, tighten the bearing cap retaining bolts starting with the middle cap working outward.
Tighten the camshaft bearing cap retaining bolts to 11 Nm (100 in. lbs.).