Clutch - Assembly

ASSEMBLY





1. Install the outer clutch hub onto the mainshaft.





2. Install the inner clutch hub onto the mainshaft.





3. Install the inner clutch hub retaining ring.





4. Starting with a friction disc and ending with the clutch spacer (no tabs), install the clutch pack.





5. Install the return spring.





6. Install the reaction plate.

7.




8. Place the support and bearing assembly into a shop press (1) and using a suitable spacer (2), press the bearing support (4) out of the bearing inner race (3).





9. Place the support and bearing assembly into a shop press (1) and using a suitable spacer (2), press the bearing support (3) into the bearing inner race (4).





10. Install the bearing and support into the clutch assembly.





11. While applying slight downward pressure on the bearing support, install the "C" clip.