Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2009 >> RAM 1500 Truck 4WD V8-5.7L >> Repair and Diagnosis >> Accessories and Optional Equipment >> Radio, Stereo, and Compact Disc >> Radio/Stereo >> Service and Repair >> Removal and Replacement >> Radio - Removal

Radio - Removal






REMOVAL

NOTE: For REQ radios, turn ignition to RUN and press the SET + SCAN buttons simultaneously to place the radio into transportation mode. The radio will display "Transportation" on the display within 5 seconds. If the radio is inoperative or not REQ, skip this step.





1. Disconnect and isolate the battery negative cable.
2. Remove the center instrument panel bezel Instrument Panel Bezel - Removal.
3. Remove the radio mounting fasteners.

CAUTION: Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.

4. Disconnect the antenna cable(s) by pulling the locking antenna connector away from the radio.
5. Disconnect the electrical connectors.

pro multis · About Operation CHARM