Auto (Rolling) Door Locks Inoperative

AUTO (ROLLING) DOOR LOCKS INOPERATIVE

For a complete wiring diagram refer to the Wiring Information Electrical Diagrams.






1. CHECK THE DOOR AJAR SWITCH STATUS
1. Ensure all doors are closed.
2. With the scan tool, observe all of the Door Ajar states.

Does the scan tool display CLOSED or YES for any door ajar state?

Yes

- Repair the Door Ajar Circuit as necessary.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Go To 2

2. ANY TPS OR VSS RELATED DTC's
1. With the scan tool read "Engine" and "Anti-Lock Brakes" DTCs.

Does the scan tool display any Throttle Position Sensor or Vehicle Speed Sensor related DTCs?

Yes

- Diagnose and repair the DTCs:
- For engines, perform the appropriate diagnostic procedure.
- For Anti-Lock Brake Testing and Inspection.

No

- Go To 3

3. ENABLE AUTO DOOR LOCKS
1. With the scan tool, observe the rolling door lock status.

Does the scan tool display ROLLING DOOR LOCKS: "ENABLED"?

Yes

- Replace the Instrument Cluster.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- With the scan tool enable the Auto Door Locks.
- Perform the BODY VERIFICATION TEST. Body Verification Test.