Instrument Panel Bin - Removal

REMOVAL

WARNING: On vehicles equipped with airbags, disable the airbag system before attempting any steering wheel, steering column, seat belt tensioner, or instrument panel component diagnosis or service. Disconnect and isolate the battery negative (ground) cable, then wait two minutes for the airbag system capacitor to discharge before performing further diagnosis or service. This is the only sure way to disable the airbag system. Failure to take the proper precautions could result in accidental airbag deployment and personal or fatal injury.






NOTE: A storage bin replaces the cup holder in the instrument panel when the vehicle is equipped with a floor console.

1. Remove the instrument panel center bezel Instrument Panel Bezel - Removal.
2. Remove the floor console Floor Console - Removal.
3. Remove the four screws (1) that secure the storage bin (2) to the instrument panel and remove the bin.