Alignment: Specifications

WHEEL ALIGNMENT, CURB HEIGHT, AND TORQUE SPECIFICATIONS

WHEEL ALIGNMENT

NOTE: Before each alignment check the front and rear curb heights of the vehicle. Verify that it is between minimum and maximum values given.











FRONT AND REAR CURB HEIGHT SPECIFICATIONS





NOTE: Before each alignment check, measure the distance between the wheel center (2) and wheel well housing (1) on either side of the vehicle. Verify that it is between minimum and maximum values given. (This is the requirement for toe-in, camber and caster). Adjusting the rear curb height is not necessary when measuring it and choosing a spec from the table accordingly.

To check front curb height measure the distance between the wheel center (2) and the wheel well housing (1) which should be between the given specifications.





To check Rear curb height measure the distance between the rear shock upper bolt (1) head to the lower bolt head (2).

















TORQUE