Removal

REMOVAL










1. Release the parking brake.
2. Raise the vehicle.
3. Loosen the cable tensioner nut at the equalizer (2) to create slack in the front cable.
4. Lower the vehicle.





5. Disconnect the brake lamp wire from the switch (1) on the pedal assembly (5).





6. Roll the carpet back, loosen the front cable grommet (1) from the floor pan and the cable retainer.





7. Disengage the release rod (6) from the arm on the pedal assembly (5)
8. Remove the bolt (7) AND nuts (3) from the pedal assembly (5) and remove the assembly.

9. Disconnect the park brake cable (4) from the pedal assembly (5).