Front Hub and Bearing - Installation

INSTALLATION





1. Install the brake dust shield (5).
2. Install the hub/bearing (1) into the steering knuckle (4) and tighten the bolts (3) to 163 Nm (120 ft. lbs.).
3. Install the brake rotor and caliper Brake Rotor - Installation.
4. Install the ABS wheel speed sensor (2) if equipped Front.

5. Install the halfshaft nut and tighten to 251 Nm (185 ft. lbs.) 4X4 only.
6. Install the wheel and tire assembly Service and Repair.
7. Remove the support and lower vehicle.