Fog Lamp - Installation

LAMP





1. From the face of the front bumper support (5), position the front fog lamp and bracket unit into the fog lamp seat.
2. Engage the two alignment pins on the back of the fog lamp bracket with the alignment holes in the seat, then push the lamp rearward far enough to engage the three latch features (1) of the fog lamp bracket with the opening on the back of the seat.
3. From the back of the front bumper support, install and tighten the two screws (4) that secure the lamp mounting bracket to the bumper support. Tighten the screws to 2 Nm (14 in. lbs.).
4. Reconnect the headlamp and dash wire harness connector to the fog lamp bulb connector receptacle (2).
5. Reinstall the front fascia onto the front bumper support. Front Bumper Fascia - Installation.
6. Reconnect the battery negative cable.
7. Confirm proper front fog lamp alignment. Adjustments.