Fog Lamp - Removal

LAMP





1. Disconnect and isolate the battery negative cable.
2. Remove the front fascia from the front bumper support. Front Bumper Fascia - Removal.
3. Reach under and behind the front bumper support (5) to access the back of the front fog lamp housing (3).
4. Disconnect the headlamp and dash wire harness connector from the front fog lamp bulb connector receptacle (2).
5. Remove the two screws (4) that secure the front fog lamp mounting bracket to the front bumper support.
6. Disengage the three latch features (1) of the fog lamp bracket from the opening on the back of the front bumper support and push the fog lamp forward far enough so the latch features are clear of the opening.
7. From the face of the front bumper support, remove the fog lamp and bracket from the seat in the face of the bumper support as a unit.