Operation CHARM: Car repair manuals for everyone.
Home >> Dodge or Ram Truck >> 2010 >> Dakota 4WD V6-3.7L >> Repair and Diagnosis >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Service and Repair >> Integrated Power Module (IPM) - Installation

Integrated Power Module (IPM) - Installation






INSTALLATION





1. Connect the wiring harness connectors to the Power Distribution Center (1) and the Front Control Module (2).





2. Position the Integrated Power Module (IPM) (1) into the battery tray. Move the IPM down and rearward to engage the locking tabs (2) into the battery tray locating slots (4).





3. Install the IPM (2) pushpin fasteners (1) into the battery tray (4).





4. Position the battery positive cable (4) and install the nut (5) onto the IPM B+ terminal stud (6). Install the IPM cover.
5. Connect the battery negative cable.
6. Confirm proper vehicle operation.

pro multis · About Operation CHARM