Crankshaft Main Bearing

CRANKSHAFT MAIN BEARING





Hand tighten bolts 1D,1G and 1F until the bedplate contacts the block.
Tighten bolts 1A - 1J 54 Nm (40 ft. lbs.)
Tighten bolts 1 - 8 7 Nm (62 in. lbs.)
Turn bolts 1 - 8 an additional 90°.
Tighten bolts A - E 27 Nm ( 20 ft. lbs.).

Bearing Clearance 0.002 - 0.046 mm (0.00008 - 0.0018 in.)

CRANKSHAFT MAIN BEARING SELECTION