NV233 Transfer Case - Removal

REMOVAL










1. Shift transfer case into 2WD.
2. Raise vehicle.
3. Drain transfer case lubricant.
4. Support transmission with jack stand.
5. Remove rear crossmember and skid plate, if equipped.
6. Disconnect front and rear propeller shafts at transfer case.Drive Shaft - Removal
7. Disconnect transfer case shift motor and mode sensor wire connector (4).
8. Disconnect transfer case vent hose (2) from the transfer case (3).





9. Support transfer case with transmission jack.
10. Secure transfer case to jack with chains.
11. Remove nuts (2) attaching transfer case (3) to transmission (1).
12. Pull transfer case and jack rearward to disengage transfer case.
13. Remove transfer case from under vehicle.