B2272

B2272-RIGHT REAR DOOR MODULE INTERNAL



- When Monitored:
With the ignition switch on.





RIGHT REAR DOOR MODULE

NOTE: Before continuing review and check the following conditions.
- Review the repair history of the vehicle. Make sure the vehicle has the correct Powertrain Control Module (PCM) and Right Rear Door Module installed. Check the part numbers.
- Using a scan tool, make sure the PCM and Right Rear Door Module have been programmed correctly. Compare the PCM VIN to the Right Rear Door Module VIN and ensure the two VINS match.

1. Turn the ignition on.
2. With the scan tool, clear the DTC(s).
3. Perform five ignition cycles, leaving the ignition switch on for a minimum of 90 seconds per cycle.
4. Using the scan tool, read the DTC(s).

Does the DTC reset?

Yes

- Replace and program the Right Rear Door Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- The DTC is not active at this time. If this code ever returns, replace the Door Module.