Power Sliding Door Module, Left (PSDML) and Right (PSDMR)

U0010-CAN INTERIOR BUS



- When Monitored:
Continuously when the ignition is on.

Battery voltage between 10 and 16 volts.

Ignition Off Draw (IOD) fused installed.

- Set Condition:
The Totally Integrated Power Module (TIPM) detects a short to ground on the CAN Interior Bus (125K)(+) circuit or a short to voltage on the CAN Interior Bus (125K)(-) circuit.

Possible Causes:

VERIFY DTC IS ACTIVE

NOTE: Make sure the IOD fuse is installed and the battery is fully charged before proceeding.

1. Turn the ignition on.
2. With the scan tool, read active DTCs.

Is this DTC active?

Yes

- Perform the Totally Integrated Power Module (TIPM) U0010-Can Interior Bus diagnostic procedure.

No

- Perform the Stored Lost Communication DTCs diagnostic procedure.