Remote Start Antenna - Installation

INSTALLATION






NOTE: Make sure the remote start antenna is positioned the same way noted during the removal procedure.

1. Install the remote start antenna module (2), and screws (1) to instrument panel assembly. Tighten to 2.5 Nm (22 in. lbs.).
2. Route the remote start coaxial cable in the position noted during the removal procedure.
3. Install the remote start antenna coaxial cable to mounting clips, if equipped.





4. Connect remote start antenna coaxial cable connector (2) to the wireless ignition node (WIN) (1).
5. Install instrument cluster Instrument Cluster - Installation.
6. Install the knee blocker. Kneeblocker - Installation.
7. Install the instrument panel top cover. Instrument Panel Cover - Installation.
8. Connect the negative battery cable, tighten the nut to 5 Nm (45 in. lbs.).