Front Display (DISP)

B210A-SYSTEM VOLTAGE LOW



- When Monitored:
At all times.

- Set Condition:
This is a CAN message that the battery voltage was below 10 Volts for over 15 seconds.





CHECK POWERTRAIN CONTROL MODULE (PCM) or ENGINE CONTROL MODULE (ECM) DTCs
1. Using the scan tool, read Powertrain Control Module (PCM) or Engine Control Module (ECM) DTCs.

Are there any Charging or Battery DTCs present?

No

- This code is for information only. At some time there was a low battery system voltage. Check the battery and charging system.

Yes

- Testing and Inspection and perform the appropriate diagnostic procedure.