Totally Integrated Power Module (TIPM)

B2206-CURRENT VIN MISSING / MISMATCH



- When Monitored:
With the ignition on.

- Set Condition:
A PCM from another vehicle has been installed in the vehicle.





1. PCM FROM ANOTHER VEHICLE INSTALLED

NOTE: This DTC is set when a PCM from another vehicle is installed into the current vehicle.

Has another PCM been installed?

Yes

- Replace the PCM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test

No

- Go To 2

2. OTHER CAN-C MODULES SET VIN MISMATCH

Is VIN Mismatch DTC set in other CAN-C modules?

Yes

- Replace the PCM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test

No

- Replace the TIPM.
- Perform BODY VERIFICATION TEST VER 1. Body Verification Test