Wireless Ignition Node (WIN)

B223C-INTRUSION TRANSCEIVER MODULE INTERNAL



- When Monitored:
Ignition on.

- Set Condition:
Internal Intrusion Transceiver Module test failed.





DETERMINING IF DTC IS CURRENT
1. With a scan tool, read and record DTC(s).
2. With the scan tool, clear DTC(s).
3. Turn the ignition off and remove the key from the ignition.
4. Lock and close all doors to allow the VTSS to go from pre-arm to armed status and wait one minute.
5. Disarm the VTSS.
6. Using the scan tool, read DTC(s).

Does the DTC reset?

Yes

- Replace the Intrusion Transceiver Module.
- Perform the BODY VERIFICATION TEST - VER 1Body Verification Test

No

- DTC is not active at this time. Test complete.
- Perform the BODY VERIFICATION TEST - VER 1Body Verification Test