P0600

P0600-SERIAL COMMUNICATION LINK



- When Monitored:
With the engine running.

- Set Condition:
Internal Bus communication failure between processors. One Trip Fault. Three Global Good Trips to Clear.





Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding.Pre-Diagnostic Troubleshooting Procedure
POWERTRAIN CONTROL MODULE (PCM)

NOTE: Diagnose any CMP or CKP Sensor faults before continuing. Check for intermittent loose CMP or CKP connections.

The Powertrain Control Module is reporting internal errors, view repair to continue.

Repair

- Replace and program the Powertrain Control Module.
- Perform the PCM Verification Test. PCM Verification Test