Second Row

INSTALLATION





1. Position the seat back frame to the seat adjuster assembly.
2. For the 40% seat back, install the inboard mounting fasteners. Tighten to 55 N-m (40 ft. lbs.).
3. For the 40% seat back, install the outboard mounting fasteners. Tighten to 30 N-m (22 ft. lbs.).
4. For the 60% seat back, install the inboard mounting fasteners. Tighten to 60 N-m (44 ft. lbs.).
5. For the 60% seat back, install the outboard mounting fasteners. Tighten to 30 N-m (22 ft. lbs.).
6. Install the seat back cushion/cover, if required. Seat Back - Installation.
7. For the 60% seat back, place the seat belt and seat buckle into position. Tighten the mounting fastener to 49 N-m (36 ft. lbs.).
8. Install the cable attachment to the back steel panel.





9. Install the outboard shield.
10. Install the recliner handle
11. Install the recliner handle mounting fasteners and cover.
12. Install the folding seat handle, mounting fasteners and cover, if equipped.
13. Install the headrest guides and headrest.