Front

INSTALLATION

NOTE: Front Seats for a detailed exploded view of the seats.

NOTE: Do not reuse the recliner assembly attaching bolts.

1. Position cover on the top of seat back.
2. Carefully roll cover down to the area that hog rings are to be installed.
3. Install the side airbag (SAB) to the seat back cover.
4. Connect the SAB wiring connector.
5. Install the SAB mounting fasteners.
6. Engage the J-clip retainers to the back frame assembly.
7. Install hog rings.
8. Roll cover downward.
9. Engage the J-clip retainer to the seat frame.
10. Install lumbar handle, if equipped.
11. Install the seat back panel. Seat Back Panel - Installation
12. Install headrest guides. Headrest Sleeve - Installation.
13. Install seat back to seat cushion. Front.
14. Install the seat to the vehicle. Seat - Installation.
15. Check seat back and headrest operation.