Rear

REMOVAL

NOTE: Take the proper precautions to protect the face of the rear A/C-heater control bezel from cosmetic damage during this service procedure.





1. Disconnect and isolate the negative battery cable.
2. Remove the rear A/C-heater control (3) and bezel (1) as an assembly from the headliner by releasing the four metal retaining tabs (2) using Trim Stick C-4755 or equivalent.
3. Disconnect the wire harness connector from the back of the rear A/C-heater control and place the control and bezel assembly on a workbench.
4. Remove the two screws (4) that secure the rear A/C-heater control to the rear control bezel and remove the control from the bezel.