Generator - Installation

3.5L





1. Install generator (1) to engine mounting bracket.
2. Install long mounting bolt (2) and short mounting bolt (3) to generator (1). Tighten bolts to 42 Nm (31 ft. lbs.).





3. Connect field wire connector (1) into generator.
4. Install B+ terminal (2) and nut (3) to generator mounting stud. Tighten nut to 10 Nm (88.5 in. lbs.)
5. Snap plastic protective cover (4) to B+ terminal.
6. Install drive belt Refer to Cooling System for belt routing, belt adjustment and bolt tightening procedures.
7. Connect negative battery cable, tighten nut to 4.5 Nm (40 in. lbs.).