Front

INSTALLATION

NOTE: Front Seats for detailed exploded views.

NOTE: All call outs are in reference to the Driver Power exploded view unless otherwise noted.

1. Install the seat back to the seat cushion assembly.
2. Install the outboard and inboard seat back bolts (30) and torque to 40 N-m (29 ft. lbs.).
3. Install the airbag wiring harness (24) to the seat bottom.
4. Install the inboard shield.
5. Install the rear fastener (31) to the inboard shield (42).
6. Install the seat buckle bolt and buckle (40). Tighten to 45 N-m (33 ft. lbs.).
7. Install the outboard shield.
8. Install the rear fastener (31) to the outboard shield (25).
9. Install the recliner handle (26) retaining clip.
10. Install the recliner handle.
11. Install the lift handle (23 - Driver Manual), if equipped.
12. Install the mounting fasteners (26 - Driver Manual) and lift handle cover (24 - Driver Manual), if equipped.
13. Install the seat to the vehicle. Seat - Removal.