Front Fore and Aft

INSTALLATION





1. Install the front engine mount (3) on the crossmember. Install the mounting bolts (2) and damper (1). Tighten the bolts to 50 Nm (37 ft. lbs.).
2. Position the fore-aft crossmember in the engine compartment and install the mounting bolts. Tighten the forward mounting bolts at the radiator support to 55 Nm (41 ft. lbs.). Tighten the rearward mounting bolts at the suspension crossmember to 55 Nm (41 ft. lbs.).





3. Install the front engine mount thru-bolt (4). Tighten the bolt to 60 Nm (44 ft. lbs.).
4. If equipped, install the engine belly pan.
5. Lower the vehicle.