Second Row

REMOVAL





1. Remove the recliner handle cover and mounting fasteners.
2. Remove the recliner handle
3. Remove the folding seat handle cover, mounting fasteners and handle, if equipped.
4. Remove the outboard shield.
5. Remove the headrest and headrest guides.
6. Fold the seat flat and remove the seat back panel by carefully prying up on the panel until the retainers disengage.
7. For the 60 split seat only, remove the seat belt anchor mounting fastener.
8. Remove the seat cover clips and pull back to expose the inboard seat back mounting fasteners.

NOTE: On the 40 split seat, the inboard mounting fasteners are located on the outside of the seat back frame. On the 60 split seat, they are located on the inside of the seat back frame which will require the seat back cushion/cover to be removed. Seat Back - Removal .





9. Remove the inboard seat back mounting fasteners.
10. Remove the outboard seat back mounting fasteners.
11. Remove the cable attachment from the back steel panel.
12. Remove the seat back from the vehicle.