Second Row

REMOVAL

NOTE: Only the 40 split seat must be removed to replace the seat cushion.

1. For the 40 split seat only, remove the seat from the vehicle. Seat - Removal.
2. Remove the seat recliner handle cover and fastener.
3. Remove the seat recliner handle.
4. Remove the seat adjuster handle cover and fastener.
5. Remove the seat adjuster handle.
6. Remove the seat side shields.
7. Remove the outboard seat bolt securing the seat cushion to the seat frame.
8. For the 40 split seat only, remove the inboard seat cushion mounting fastener.
9. Pull the release latch and push up on seat cushion to separate from the seat frame.
10. Remove the cable assembly from the seat cushion.
11. Remove the gas strut from the seat cushion, if equipped.
12. Remove the cushion from the seat frame.
13. Unzip the cover from the cushion.
14. Carefully pull the seat cover off of the seat cushion, cutting any hog rings and discarding them, if required.