Second Row Seats - Installation

INSTALLATION

1. Place seat in position in vehicle. Make sure tracks are in time and locked in place. In time means that both tracks are in the same fore/aft position, same locking window on each track.
2. Install bolts to attach front of seat adjuster to the floor. Tighten bolts to 95 Nm (70 ft. lbs.).
3. Slide seat forward and then push back on the seat to ensure that both tracks are locked into position. Ensure tracks are still in time before tightening bolts and install bolts attaching rear of seat track to the floor. Tighten bolts to 95 Nm (70 ft. lbs.).
4. Verify seat operation.