Air Cleaner Body - Installation

INSTALLATION

1. Push the air filter housing onto the locating pins.





2. Install air filter housing (2) straight down on locating pins.
3. Reposition the bracket and install the retainer (1). Tighten the retainer to 5 Nm (44 in.lbs.).
4. Install the push pin that secures the air scoop to the top of the radiator core support.
5. Connect inlet air temperature sensor harness connector (3).
6. Reconnect the air inlet hose to the throttle body, and tighten the clamp (1).
7. Connect negative battery cable.