Instrument Cluster - Installation

INSTALLATION





1. Carefully slide the cluster into its location and connect the two electrical connectors (1) to the cluster.





2. Position the cluster in the instrument panel and Install the four cluster attaching screws (1).






NOTE: When installing the cluster trim bezel, be sure to place the left hand side of the bezel underneath the AC vent. It may be necessary to flex the trim on the AC vent slightly to allow the cluster trim bezel locking clips secure entry into the instrument panel.

3. Install the cluster trim bezel.
4. Connect the battery negative cable.

LENS





1. Align lens locking tabs (1) with instrument cluster mask assembly and snap securely into place.