License Plate Lamp - Installation

LAMP





1. Position the license plate lamp (2) to the underside of the liftgate handle and light bar assembly (3).
2. Align the socket and bulb with the keyed opening on the top of the lamp housing.
3. Insert the bulb and socket into the housing until the socket is firmly seated.
4. Rotate the socket clockwise about 30 degrees to lock it into place.
5. Engage the lamp interlocking tab mounting feature at the end of the lamp housing opposite from the hooded (4) latch (1) with the outboard edge of the mounting hole in the handle and light bar assembly.
6. Push the lamp toward the outboard side of the vehicle while pushing the inboard end of the lamp firmly and evenly into the mounting hole until the lamp latch feature snaps into place.
7. Reconnect the battery negative cable.