Wireless Ignition Node Receiver - Installation

INSTALLATION

NOTE: The WIN initialization procedure is required whenever the WIN or shaft lock module is replaced on vehicles equipped with the shaft lock module. .





1. Rotate and position the WIN (1) and bracket (2) into the to instrument panel opening.





2. Install the lower WIN bracket attaching screw (4).
3. Install the lower WIN attaching screw (5).
4. Connect the WIN electrical connector (1) and antenna connector (3) to the WIN.
5. Install the WIN trim ring (2).





6. Install the upper WIN bracket attaching screw (1) and reposition the instrument cluster into the instrument panel and install the instrument cluster bezel. Instrument Cluster - Installation.
7. Install upper steering column shroud. Steering Column Shroud - Installation.
8. Install knee blocker. Kneeblocker - Installation.
9. Connect negative battery cable.
10. If necessary, program the WIN, Programming and Relearning.