Park Assist Module (PTS)

B222A-00-VEHICLE LINE MISMATCH



- When Monitored:
With the ignition on.

- Set Condition:
If the Vehicle Line data transmitted on the bus doesn't correspond with the data stored in the Park Assist Module.





CHECK VEHICLE LINE IN THE PCM
1. With the scan tool, compare the vehicle line that is programmed in to the Powertrain Control Module (PCM) to the vehicle line of the vehicle.

Does the vehicle line programmed into the PCM match the vehicle?

Yes

- Replace the Park Assist Module.
- Perform the BODY VERIFICATION TEST. Body Verification Test.

No

- Test complete, the condition or conditions that originally set this DTC are not present at this time. Using the wiring diagrams as a guide, check all related splices and connectors for signs of water intrusion, corrosion, pushed out or bent terminals, and correct pin tension.