Grille - Installation

INSTALLATION





1. Install the front lamp units to both sides of the grille, Front Lamp Unit - Installation.
2. Install the grille to the vehicle and connect the front lamp, side marker lamp and the turn signal lamp connectors.
3. Carefully push the lower part of the grille until the lower grille fasteners lock properly into position.






NOTE: This step requires proper positioning of the grille so as both side of the grille are installed at the same time.

4. Position properly then carefully push the sides of the grille until the fasteners lock properly into position.





5. Install the push pins (1) to the grille.





6. Install the torx screw (2) to the left side of the grille and fender.
7. Install the torx screws (1) to the left side of the grille and the radiator support.





8. Install the torx screw (2) to the right side of the grille and fender.
9. Install the torx screws (1) to the right side of the grille and the radiator support.
10. Lower the hood.