Center Bezel

REMOVAL





1. Before proceeding with the following repair procedure, review all warnings and cautions. Service Precautions
2. Set the park brake and move the transmission gear selector into the most rearward position.
3. Remove the storage bin mat (1).





4. Remove the screws (1).





5. Using a trim stick C-4755 or equivalent, remove the storage bin.





6. Using a trim stick C-4755 or equivalent, release the top most retaining clips (1)

CAUTION: To avoid damage to the bezel do not pull on the bezel to release the retaining clips (2).

7. Using a trim stick C-4755 or equivalent, carefully release the retaining clips (2).
8. Release the remaining retaining clips (3 and 4) and separate the bezel from the instrument panel.





9. Reach behind the bezel to access and disconnect all electrical connections.
10. Remove the center bezel from the instrument panel.