Programming and Relearning

DRIVE MOTOR TEACH PROCEDURE

REPLACEMENT DRIVE MOTOR

1. Press and hold the sunroof close switch until the sunroof glass moves into the vent position and automatically reverses slightly and stops in the vent position.
2. Release sunroof switch.
3. Within five seconds of releasing sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
4. Release sunroof switch. Sunroof will now operate normally.

ORIGINAL DRIVE MOTOR

1. Press and hold the sunroof close switch until the sunroof stops at the closed position.
2. Release sunroof switch.
3. Press and hold sunroof close switch once again for at least 10 seconds. After 10 seconds of pressing the close switch the sunroof glass will automatically move into the vent position and stop.
4. Release sunroof switch.
5. Within five seconds of releasing the sunroof switch, press and hold the sunroof close switch again until the sunroof glass fully cycles and returns to the closed position.
6. Release sunroof switch. The sunroof will now operate normally.